• 10/100/1000M Gigabit POE Fiber Media Converter, Full-power technology, Max.30W, Supports line speed switching of all ports, Duplex-fiber/Single-fiber optional, 0-120KM optional
                 

  • 10/100M Ethernet Fiber Switch included one fiber optic port and 4~24ports of 10/100M Ethernet, Fully compatible with IEE802.3, IEEE802.3u, Supports super jumbo frame etc.  
                 

         

  • Super mini in size, Support one channel digitalized analog video and one reverse RS485 data uncompressed high quality transmission, Auto PAL/NTSC/SECAM Compatible,0-100KM optional              

         

Product>Fiber Media Converter>Managed Fiber Media Converter

Managed Fiber Media Converter

Brief introduction

    DLX-860 10/100M,10/100/1000M Managed Fiber Media Converters Chassis adopts 19inch, 2U standard height and contains 16slots in front panel. Offer a high price/performance ratio; realize conversion between 10M, 100M, 1000M Ethernet electrical port and optical port, support variety of data rate, SM/MM, single fiber/double fiber, and SFP etc. With simple set-up and complete function management interface, it supports protocols like SNMP, WEB, CONSOLE and TELNET, and realizes the integrated management to all chassis.

Functions of Hardware

Support 10Base-T, 100Base-TX, 100Base-FX, 1000Base-T

Meet standards IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.3Z, IEEE802.3ah, TS1000

With high performance auto-sensing exchanging chipset meeting industrial standard, secure and steady data transmission is ensured with non-traffic jam exchanging performance

Chassis supports both 10/100M media converters and 10/100/1000M media converters, and realizes mixing management of the two kinds of media converters

Managed 10/100M and 10/100/1000M media converter can realize Max.2046bytes packet at store-and-forward mode, Max. 9K bytes packet at cut-through mode

Auto-negotiate and Auto-cross to NIC/HUB and MDI/MDI-X

Standalone chassis with internal special communication power supply, chassis support dual redundant power supply(support OLP function)

Fiber media converter module, SFP module, cascading card and NMS card support hot plug

Managed media converter supports FEF optical link-loss alarm and remote diagnostic functions

Advanced optical and electronic integration mechanism can supports good optic characteristic and electrical characteristic, and can ensure the high quality and excellent reliability of data transmit

Auto restart when crashed, super heat radiation, super low power consumption(<1.5W)

Main board adapts multi layer structure of circuit board, possess excellent reliability and good anti-jamming feature

Average working time of fault free is more than 50,000hours,meet the standard of telecommunication operation

The Local end support rack mounted

Support Duplex SC/Simplex SC fiber connector optional

Functions of Software

Master/slave structure,providing management module (master, slave), maximum 4 chassis cascaded can be managed

Supporting protocols like CONSOLE, WEB, Telnet and SNMP

Complete system information can be set up and displayed, including the name of the chassis, terrain information, related information of IP, constant operating time and the versions of the hardware and soft ware

Real time display of voltage and temperature on the managed media converters, temperature of chassis and report fault in time

Each port at local or remote devices can be set up or tracked, including the connecting status, connecting speed, half/full duplex, port locked and LFP etc

With rate limiting, any rate between 0Mbps and 100M bps can be set at the basic frame of 32Kbps for managed 10/100M media converter, and any rate between 0Mbps and 1000M bps can be set at the basic frame of 64Kbps for managed 10/100/1000M media converter

Managed 10/100M media converter support management of IP113A/C/F/M, reduce the cost

Managed 10/100/1000M media converter support SFP, CWDM SFP and DWDM SFP, and it can show the SFP information and digital diagnosis function

Supporting Link Loopback test, precisely locating the failure, convenient for link test

Remote power off alarming, precisely distinguish remote failure

With LFP, quickly locates the failure

With SNMP protocol, Trap Destination and Community Name and related right can be set up, real time receive and display of alarming information in way of SNMP Trap, special supervising window, bumping alarming information and mail alarming

Offering MIB files, convenient to be merged to the third party’s SNMP

Powerful historical alarming and operating log information tracking and management function

Flow statistics and Pre-alarming function, real-time display of the communication status at each port

Equipment restart, system or module restart by management software, set-up information on each module will be stored spontaneously when power off

With graded management mode (common user, super user and administrator)

Reset to factory set up or dip switch status are optional

Supporting FTP online upgrading

NMS support network device auto-sensing and adding

With centralized management and Top tree, several chassis can be managed in the same interface at the same time; with grouping management any converter can be conveniently manipulated among many converters

--------------------------------------------------------------------------------------------------------------------------------------------------------------

Types for order, Please find in the PDF file